ARG 300 F

Band saw for metal - gravitation

Noncommittal Demand

Machine: ARG 300 F

Please enter your contact details. We will contact you as soon as possible.


Cancel

We confirm receipt of noncommittal demand

Demanded machine: ARG 300 F

Firstname:
Phone:
E-mail:
Your inquiry:
Destination country:

We will contact you as soon as possible using given contact details.

Back to website
3150 x 27 x 0,9

A new unique design. An upgraded version of the legendary ARG 300 model series, manufactured for over 20 years, with a completely new saw blade arm.

The most up to date concept of the cast iron arm creates a closed section that is hollow along its full length at all load-carrying points. This guarantees outstanding stiffness of the entire system, maximum accuracy during cutting and a long service life of the saw blade. All of electrical wiring and coolant distribution are concealed in hollow parts of the arm, which means they are protected from damage. The new concept of the arm also brings a great simplification when changing the saw band or when cleaning the inside of the arm. You just need to open the hinged back cover of the arm and it will stay locked in the upper position. Apart from the new saw arm design, there are many technological adjustments that improve user comfort as well as the quality and durability of the machine.

Universal robust band saw is appraised for general use in continuous uninterrupted production plants and in work-shops (work on locks, maintenance) as well. Industrial band 27 x 0.9 mm is manufactured in many versions and allows for cutting of wide range of materials, including stainless steel or tool steel. Ergonomic base with a large removable chips container and massive arm turning system with large loading surfaces ensure exceptional stability of the machine even when cutting heavy workpieces. The band saw arm uplift is manual; the feed into cut is carried out by the weight of the arm, with the possibility of continuous regulation by the oil damper butterfly valve. When the cut is finished the band saw drive automatically switches off. To facilitate easy arm uplift the machine is equipped with adjustable tension springs that allow for setting of optimum force required for the arm uplift according to characteristics of the material to be cut.Maximum cutting efficiency is now maintained thanks to the possibility of setting optimum saw band speed by a frequency converter in the range between 15 and 90 m/min., which significantly contributes to cutting speed, accuracy and service life of saw bands.

  • Continuous adjustment of the cutting angle within the range 90°–60° when the workpiece is clamped tight.
  • Very robust machine framework composes of castings from grey cast iron and ensures vibration absorption.
  • Modern concept of the band saw arm allows for large cutting ranges in upright and angular cuts.
  • Simple locking and adjusting of the desired cutting angle on the angle scale.
  • Massive quick-clamping vice ensures easy and reliable mate-rial clamping.
  • Large diameter running wheels and precise three-side hardmetal guiding ensure long service life of the band and cutting accuracy. Large diameter running wheels and precise three-side hardmetal guiding ensure long service life of the band and cutting accuracy.
  • Overdesign of running wheel bearings, tensioning wheel system and all rotary parts ensures long service life of the machine.
  • Noiseless and maintenance-free band drive is provided by an industrial electric motor with worm gearbox.
  • The machine is connected to a complete cooling system with a high-performance pump and possibility of regulating the flow on both guiding heads independently. Coolant tank with a pump is placed in the base of the machine.
  • Easy control by ergonomically placed controls (electrical and hydraulics) on the base of the machine.
  • A continuously adjustable stop with a 500mm scale is supplied with the machine.
90° +45° +60°
300 240 155
290 225 150
375 x 190 240 x 160 150 x 150

Main motor 400 V, 50 Hz, 2,2 kW
Pump motor 400 V, 50 Hz, 0,05 kW
Saw blade speed 15 – 90 m/min.
Working height of vice 910 mm
Coolant tank cca 15 l
Machine dimensions (min.) 1760 x   890 x 1560 mm
Machine dimensions (max.) 2180 x 1660 x 2030 mm
Machine weight 455 kg

*) Is always a part of the conveyor. 
​Note: You can connect M280 behind the cut as a conveyor only if angular cutting isn‘t required.

  • Workpiece stop - Standard equipment

    Robust stop with a 500mm scale for setting the required length of the material to be cut.

  • Frequency converter - Standard equipment

    Enables continuous blade speed regulation between 15–90 m/min. and thus setting the optimum cutting conditions for the given material.

  • Pressure device

    Used to clamp the bundles of material to be cut. Ensures simple and reliable material clamping using a vertical contact pressure.

  • Material chute

    Continuously joins the vice behind the cut and allows for easy slide of cut pieces into a container when cutting larger series. The chute construction consisting of 2 parts prevents leakage of the coolant.

  • Halogen lamp

    Provides good lighting of the workplace of the machine. An invaluable tool especially when the lighting at the workplace is insufficient.

  • Oil mist lubrication

    Creates an oil mist that is sprayed onto the cutting edge. It replaces the use of a classic coolant, especially when cutting sections during which leakages may occur. Possibility of using organic oils.

  • Laser alignment

    High-quality industrial laser projects the cutting line on the material to be cut. Makes the setting of the required material length simpler, faster and more accurate.

  • Cleaning brush

    Steel cleaning brush, driven by driving wheel. Used to remove chips from the saw band behind the cut.

  • Saw band tension indicator

    Ensures accurate tensioning of the saw band to a required value according to the pressure gauge and its control during the use of the machine. Optimum tensioning of the saw band is essential for its service life and cutting accuracy.

  • Auto-start descent of the arm

    In standard machines, the control valve of the arm descent has to be shut after the arm uplift and by the next arm descent, the descent speed has to be set again. In this version, the control valve is additionally fitted with an electro-hydraulic valve, which remains after the arm uplift in the set position. After saw blade start, it is automatically released and the arm descents into the cut at a set speed. Thus, setting of the descent speed for each cut falls off. This significantly eliminates operator error and thus protects the saw blades, and increases also productivity of the machine. An ideal help when cutting material in larger series.

  • A new unique design. An upgraded version of the legendary ARG 300 model series, manufactured for over 20 years, with a completely new saw blade arm.

    The most up to date concept of the cast iron arm creates a closed section that is hollow along its full length at all load-carrying points. This guarantees outstanding stiffness of the entire system, maximum accuracy during cutting and a long service life of the saw blade. All of electrical wiring and coolant distribution are concealed in hollow parts of the arm, which means they are protected from damage. The new concept of the arm also brings a great simplification when changing the saw band or when cleaning the inside of the arm. You just need to open the hinged back cover of the arm and it will stay locked in the upper position. Apart from the new saw arm design, there are many technological adjustments that improve user comfort as well as the quality and durability of the machine.

    Universal robust band saw is appraised for general use in continuous uninterrupted production plants and in work-shops (work on locks, maintenance) as well. Industrial band 27 x 0.9 mm is manufactured in many versions and allows for cutting of wide range of materials, including stainless steel or tool steel. Ergonomic base with a large removable chips container and massive arm turning system with large loading surfaces ensure exceptional stability of the machine even when cutting heavy workpieces. The band saw arm uplift is manual; the feed into cut is carried out by the weight of the arm, with the possibility of continuous regulation by the oil damper butterfly valve. When the cut is finished the band saw drive automatically switches off. To facilitate easy arm uplift the machine is equipped with adjustable tension springs that allow for setting of optimum force required for the arm uplift according to characteristics of the material to be cut.Maximum cutting efficiency is now maintained thanks to the possibility of setting optimum saw band speed by a frequency converter in the range between 15 and 90 m/min., which significantly contributes to cutting speed, accuracy and service life of saw bands.

    • Continuous adjustment of the cutting angle within the range 90°–60° when the workpiece is clamped tight.
    • Very robust machine framework composes of castings from grey cast iron and ensures vibration absorption.
    • Modern concept of the band saw arm allows for large cutting ranges in upright and angular cuts.
    • Simple locking and adjusting of the desired cutting angle on the angle scale.
    • Massive quick-clamping vice ensures easy and reliable mate-rial clamping.
    • Large diameter running wheels and precise three-side hardmetal guiding ensure long service life of the band and cutting accuracy. Large diameter running wheels and precise three-side hardmetal guiding ensure long service life of the band and cutting accuracy.
    • Overdesign of running wheel bearings, tensioning wheel system and all rotary parts ensures long service life of the machine.
    • Noiseless and maintenance-free band drive is provided by an industrial electric motor with worm gearbox.
    • The machine is connected to a complete cooling system with a high-performance pump and possibility of regulating the flow on both guiding heads independently. Coolant tank with a pump is placed in the base of the machine.
    • Easy control by ergonomically placed controls (electrical and hydraulics) on the base of the machine.
    • A continuously adjustable stop with a 500mm scale is supplied with the machine.
  • 90° +45° +60°
    300 240 155
    290 225 150
    375 x 190 240 x 160 150 x 150

    Main motor 400 V, 50 Hz, 2,2 kW
    Pump motor 400 V, 50 Hz, 0,05 kW
    Saw blade speed 15 – 90 m/min.
    Working height of vice 910 mm
    Coolant tank cca 15 l
    Machine dimensions (min.) 1760 x   890 x 1560 mm
    Machine dimensions (max.) 2180 x 1660 x 2030 mm
    Machine weight 455 kg

  • *) Is always a part of the conveyor. 
    ​Note: You can connect M280 behind the cut as a conveyor only if angular cutting isn‘t required.

    • Workpiece stop - Standard equipment

      Robust stop with a 500mm scale for setting the required length of the material to be cut.

    • Frequency converter - Standard equipment

      Enables continuous blade speed regulation between 15–90 m/min. and thus setting the optimum cutting conditions for the given material.

    • Pressure device

      Used to clamp the bundles of material to be cut. Ensures simple and reliable material clamping using a vertical contact pressure.

    • Material chute

      Continuously joins the vice behind the cut and allows for easy slide of cut pieces into a container when cutting larger series. The chute construction consisting of 2 parts prevents leakage of the coolant.

    • Halogen lamp

      Provides good lighting of the workplace of the machine. An invaluable tool especially when the lighting at the workplace is insufficient.

    • Oil mist lubrication

      Creates an oil mist that is sprayed onto the cutting edge. It replaces the use of a classic coolant, especially when cutting sections during which leakages may occur. Possibility of using organic oils.

    • Laser alignment

      High-quality industrial laser projects the cutting line on the material to be cut. Makes the setting of the required material length simpler, faster and more accurate.

    • Cleaning brush

      Steel cleaning brush, driven by driving wheel. Used to remove chips from the saw band behind the cut.

    • Saw band tension indicator

      Ensures accurate tensioning of the saw band to a required value according to the pressure gauge and its control during the use of the machine. Optimum tensioning of the saw band is essential for its service life and cutting accuracy.

    • Auto-start descent of the arm

      In standard machines, the control valve of the arm descent has to be shut after the arm uplift and by the next arm descent, the descent speed has to be set again. In this version, the control valve is additionally fitted with an electro-hydraulic valve, which remains after the arm uplift in the set position. After saw blade start, it is automatically released and the arm descents into the cut at a set speed. Thus, setting of the descent speed for each cut falls off. This significantly eliminates operator error and thus protects the saw blades, and increases also productivity of the machine. An ideal help when cutting material in larger series.

What are cookies?

Text files that a website saves on your computer or mobile device the moment you start using the website. The page remembers the tasks that you have made on them, as well as your preferences (e.g., login information, language, font size, and other display preferences), and therefore, you do not need to enter these details again and jump from one page to another.

By continuing to browse the site, you are agreeing to our use of cookies. More information Less information