CTR 750 MOBIL

Log band saw

Noncommittal Demand

Machine: CTR 750 MOBIL

Please enter your contact details. We will contact you as soon as possible.


Cancel

We confirm receipt of noncommittal demand

Demanded machine: CTR 750 MOBIL

Firstname:
Phone:
E-mail:
Your inquiry:
Destination country:

We will contact you as soon as possible using given contact details.

Back to website
4140 x 34-35 x 0,9-1,0 mm
∅ 750
640
530 x 530

Feed into the cut and back – hand-operated
Arm height adjustment – manual

Control panel – on a mobile bridge
Log handling – manual
Total sawing length: 4,2 m

The machine is mounted on a stable trailer that allows easy transport of the machine to the sawing location.

The total weight of CTR 750 mobil with a trailer is 651 kg.

Check your vehicle’s registration card for the maximum permissible trailer weight!

The trailer is fitted with six robust, infinitely adjustable support legs. These ensure stability both when loading and handling the log and during the sawing itself. Easy loading of the log onto the loading area of the machine using a manual winch and a path for log rolling (accessory). The trailer is homologated, including travel sections, material clamps and tilting plates. When applying for a new MOT test certificate, it is necessary to remove the travel bridge with the saw band arm.

Easy disassembly and reassembly. The trailer is single-axle and non-braked. The delivery also includes a waterproof tarpaulin, protecting the bridge with the saw band arm from rain during transport or parking. For secure fastening, the tarpaulin is fitted with grommets and a steel cable with ends allowing the use of a padlock. The maximum permissible speed is 130 km/h.

The bigger and stronger version of the popular CTR 550 allows for processing of logs up to 75 cm in diameter. It also uses a bimetallic metal-cutting saw bands, but it is one size bigger. While the size of the bimetallic saw band in CTR 550 is 27 x 0.9 m, the size of the band in CTR 750 is 34 x 1.1 mm which, combined with a powerful 5.5 kW engine can deal with logs of large diameters. Simple hand feed into the cut and back. Height is adjusted using a hand crank with adjustable scale.

Use of a bimetallic saw band which is normally used in metal band saws brings following advantages:

  • very simple operation
  • single saw band cuts all types of wood without tooth adjustment (sharpening, tooth setting)
  • elimination of tedious, technically challenging sharpening and setting of teeth
  • you can immediately start cutting wood in professional quality without any necessary experience
  • bimetallic saw band easily cuts metal materials in the log such as nails, shrapnel or bullets
  • professional three-side hardmetal saw band guidance in guiding heads and robust support of all rotary parts ensure high cutting accuracy and long service life of the saw band
  • maximum accuracy, like in professional machines
  • no need to purchase tooth sharpener and tooth setting machine
  • easy accessibility and low cost of bimetallic saw bands

Powerful 5.5 kW engine ensures full power during fully professional cutting, cutting of high-quality round timber or when cutting very hard materials. Instead of bimetallic metal-cutting band sized 34 x 1.1 mm you can use a special bime-

tallic wood-cutting band sized 35 x 0.9 mm which (same as the bimetallic metal-cutting band) does not require sharpening and setting of teeth. You can also fit your machine with standard saw-cutting bands (35 x 0.9 mm) identical to those used in higher professional models CTR 710, 800 and 950. Larger teeth in these saw bands allow for increase of productivity when cutting large diameter logs. However, in the above mentioned saw bands it is necessary to sharpen and set the teeth regularly.

The arm is fitted with large aluminium running wheels with accurate balancing against vibrations. The wheel has a groove along its circumference. The groove holds a replaceable rubber-textile belt which creates an optimum contact area between the wheel and the saw band.

The sturdily mounted running wheel is powered through a wedge belt by a professional electrical motor speciallybalanced against vibrations. The tensioning wheel system moves within a solid cast iron guiding, which ensures long-term service life and setting accuracy even in long-term machine operation.

CTR series present the latest trends in construction of log saw bands with a special emphasis on maximum accuracy and long-term service life of the machine while ensuring minimum costs. The machines are designed in an original modular execution which allows easy replacement or adjustment of all main technical sections and their individual parts. This in the long-term perspective reduces the maintenance costs and service times and therefore production stoppages as well.

Max. log diameter 750 mm
Max. opening betwen blade guides 640 mm
Max. elevation of blade 660 mm
Min. log height   25 mm
Max. depth of cut 255 mm
Total sawing length 4,2 m
Min. log length 0,75 m
Saw blade motor 5,5 kW
Sawblade 4140 x 34 x 1,1 mm
Trailer weight 396 kg
Total weight of the machine including the trailer 651 kg
Total length of the machine including the trailer

SPECIAL ACCESSORIES

  • Extending section 2,25 m

    Cutting length of extending section is 2,25 m. There is a possibility to prolong the cutting length by connecting the next extending section. Each section is equipped with four robust, adjustable supporting legs.

  • Loading platform

    Allows loading of logs on the trailer.

  • Winch

    Allows loading of logs on the trailer.

  • Lever for log loading

    Serves as help with manipulation with logs on machine frame.

  • Material clamp with variable square

  • Additional clamp arm

  • Hand operated grease gun

    For regular maintenance of the machine according to the lubrication plan. Metal grease gun for 400g cartridges. Equipped with a flexible pressure tube.

  • Grease LV 2-3

    400g cartridge for the grease gun.

CONSUMABLE PARTS

  • Hard-metal plate 2 x 25 x 0,9 mm

  • Hard-metal plate 12 x 4 mm

  • Running wheel wedge belt SPB 1850
    Wheel wedge belt B 17x1560 Lw

  • Feed into the cut and back – hand-operated
    Arm height adjustment – manual

    Control panel – on a mobile bridge
    Log handling – manual
    Total sawing length: 4,2 m

    The machine is mounted on a stable trailer that allows easy transport of the machine to the sawing location.

    The total weight of CTR 750 mobil with a trailer is 651 kg.

    Check your vehicle’s registration card for the maximum permissible trailer weight!

    The trailer is fitted with six robust, infinitely adjustable support legs. These ensure stability both when loading and handling the log and during the sawing itself. Easy loading of the log onto the loading area of the machine using a manual winch and a path for log rolling (accessory). The trailer is homologated, including travel sections, material clamps and tilting plates. When applying for a new MOT test certificate, it is necessary to remove the travel bridge with the saw band arm.

    Easy disassembly and reassembly. The trailer is single-axle and non-braked. The delivery also includes a waterproof tarpaulin, protecting the bridge with the saw band arm from rain during transport or parking. For secure fastening, the tarpaulin is fitted with grommets and a steel cable with ends allowing the use of a padlock. The maximum permissible speed is 130 km/h.

    The bigger and stronger version of the popular CTR 550 allows for processing of logs up to 75 cm in diameter. It also uses a bimetallic metal-cutting saw bands, but it is one size bigger. While the size of the bimetallic saw band in CTR 550 is 27 x 0.9 m, the size of the band in CTR 750 is 34 x 1.1 mm which, combined with a powerful 5.5 kW engine can deal with logs of large diameters. Simple hand feed into the cut and back. Height is adjusted using a hand crank with adjustable scale.

    Use of a bimetallic saw band which is normally used in metal band saws brings following advantages:

    • very simple operation
    • single saw band cuts all types of wood without tooth adjustment (sharpening, tooth setting)
    • elimination of tedious, technically challenging sharpening and setting of teeth
    • you can immediately start cutting wood in professional quality without any necessary experience
    • bimetallic saw band easily cuts metal materials in the log such as nails, shrapnel or bullets
    • professional three-side hardmetal saw band guidance in guiding heads and robust support of all rotary parts ensure high cutting accuracy and long service life of the saw band
    • maximum accuracy, like in professional machines
    • no need to purchase tooth sharpener and tooth setting machine
    • easy accessibility and low cost of bimetallic saw bands

    Powerful 5.5 kW engine ensures full power during fully professional cutting, cutting of high-quality round timber or when cutting very hard materials. Instead of bimetallic metal-cutting band sized 34 x 1.1 mm you can use a special bime-

    tallic wood-cutting band sized 35 x 0.9 mm which (same as the bimetallic metal-cutting band) does not require sharpening and setting of teeth. You can also fit your machine with standard saw-cutting bands (35 x 0.9 mm) identical to those used in higher professional models CTR 710, 800 and 950. Larger teeth in these saw bands allow for increase of productivity when cutting large diameter logs. However, in the above mentioned saw bands it is necessary to sharpen and set the teeth regularly.

    The arm is fitted with large aluminium running wheels with accurate balancing against vibrations. The wheel has a groove along its circumference. The groove holds a replaceable rubber-textile belt which creates an optimum contact area between the wheel and the saw band.

    The sturdily mounted running wheel is powered through a wedge belt by a professional electrical motor speciallybalanced against vibrations. The tensioning wheel system moves within a solid cast iron guiding, which ensures long-term service life and setting accuracy even in long-term machine operation.

    CTR series present the latest trends in construction of log saw bands with a special emphasis on maximum accuracy and long-term service life of the machine while ensuring minimum costs. The machines are designed in an original modular execution which allows easy replacement or adjustment of all main technical sections and their individual parts. This in the long-term perspective reduces the maintenance costs and service times and therefore production stoppages as well.

  • Max. log diameter 750 mm
    Max. opening betwen blade guides 640 mm
    Max. elevation of blade 660 mm
    Min. log height   25 mm
    Max. depth of cut 255 mm
    Total sawing length 4,2 m
    Min. log length 0,75 m
    Saw blade motor 5,5 kW
    Sawblade 4140 x 34 x 1,1 mm
    Trailer weight 396 kg
    Total weight of the machine including the trailer 651 kg
    Total length of the machine including the trailer
  • SPECIAL ACCESSORIES

    • Extending section 2,25 m

      Cutting length of extending section is 2,25 m. There is a possibility to prolong the cutting length by connecting the next extending section. Each section is equipped with four robust, adjustable supporting legs.

    • Loading platform

      Allows loading of logs on the trailer.

    • Winch

      Allows loading of logs on the trailer.

    • Lever for log loading

      Serves as help with manipulation with logs on machine frame.

    • Material clamp with variable square

    • Additional clamp arm

    • Hand operated grease gun

      For regular maintenance of the machine according to the lubrication plan. Metal grease gun for 400g cartridges. Equipped with a flexible pressure tube.

    • Grease LV 2-3

      400g cartridge for the grease gun.

    CONSUMABLE PARTS

    • Hard-metal plate 2 x 25 x 0,9 mm

    • Hard-metal plate 12 x 4 mm

    • Running wheel wedge belt SPB 1850
      Wheel wedge belt B 17x1560 Lw

What are cookies?

Text files that a website saves on your computer or mobile device the moment you start using the website. The page remembers the tasks that you have made on them, as well as your preferences (e.g., login information, language, font size, and other display preferences), and therefore, you do not need to enter these details again and jump from one page to another.

By continuing to browse the site, you are agreeing to our use of cookies. More information Less information