CTR 550 GX
Confirmamos la recepción de la consulta no vinculante
Máquina de interés: CTR 550 GX
Empresa:
Kontaktní osoba:
IČO:
Adresa:
Teléfono:
E-mail:
Su pregunta:
Región de destino:
Tan pronto sea posible nos pondremos en contacto con los datos que ha ingresado.
Volver a la página
Feed into the cut and back - hand-operated
Arm height adjustment - manual
Control panel - on a mobile bridge
Log handling - manual
In contrast to the standard version the sawmill is equipped with a professional Honda 8.7 kW (11 HP) petrol engine. Sufficient engine power allows trouble-free processing of logs of large diameters in all applications without the possibility of using an electric motor. Overall low weight allows easier transport of the machine. Due to higher weight and vibrations of petrol engine the construction of travelling bridge and sawmill arm is completely reinforced. The smallest machine in the offer. It is designed primarily for cutting smaller volumes of lumber. Ideal solution for family farms or small sawmilling companies. Very simple hand feed into the cut and back. The control panel is placed on a mobile bridge of the sawmill arm. Thanks to that the operator has closer access to the workpiece when cutting. Height is adjusted using a hand crank with adjustable scale.
The solidly mounted drive wheel is driven via a V-belt by a professional Honda petrol engine. Mechanical clutch lever enables an easy start of the engine and removal of the engine from the saw blade when the cut had finished.
The tensioning wheel system moves in a cast iron guide, which guarantees long service life and precision adjustment even with long-term use of the machine. The arm is fitted with aluminium running wheels with precise anti-vibration balancing. The circumference of the wheel has a recessed groove in which a replaceable rubber-textile V-belt is fitted, which forms the contact surface between the wheel and the saw blade. The stability of the machine is based on solid steel travel sections, which ensure optimum guidance of the sawmill bridge. The travel sections are fitted with tilting angle bars and log clamps/cam dogs.
The samill CTR 550 GX uses standard sawmill blades 27-35 x 0.9 mm as with the fully professional models.
The CTR model series represents the latest trends in log-cutting sawmill design, with special emphasis on maximum accuracy and long service life at minimum cost. The machines are designed in an original modular way, which allows easy replacement or adjustment of all main technical nodes and their individual parts. This significantly reduces maintenance costs in the long-term use of the machine and also reduces service times, thus reducing production downtime.
All pictures shown are for illustration purpose only. Actual product may vary due to product enhancement.
| Max. log diameter | 550 mm |
| Max. opening betwen blade guides | 500 mm |
| Max. elevation of blade | 465 mm |
| Min. log height | 20 mm |
| Max. depth of cut | 200 mm |
| Max. log length (standard model) | 3,6 m |
| Length track section | 2,25 m |
| Min. log length | 0,9 m |
| Saw blade motor | 8,7 kW |
| Sawblade | 3340 x 27÷35 x 0,9 mm |
| Weight (standard model) | 310 kg |
| Weight (track section) | 54 kg |
SPECIAL ACCESSORIES
-
Sección de extensión 2,25 m
Incluye de serie: 3x travesaños de apoyo, 1x tope angular, 1x sujeción de material Puntos de sujeción adicionales: 1x tope angular, 1x sujeción de material
-
Indicador de tensión de la cinta de sierra
Permite el tensado preciso de la cinta de sierra hasta el valor óptimo según el manómetro y, sobre todo, su control durante el funcionamiento de la máquina. Durante el corte se produce un cambio de temperatura en la cinta de sierra y, debido a la dilatación térmica, se alarga su longitud total. El resultado es una tensión insuficiente de la cinta, que es una de las principales causas de un corte desigual y ondulado.
En el indicador del manómetro verá inmediatamente la caída de presión y podrá proceder al tensado de la cinta de sierra. El tensado óptimo de la cinta es fundamental tanto para la calidad del corte como para la vida útil de la cinta y de toda la máquina.
-
Gancho volteador
Se utiliza para girar, rodar y manipular troncos. La punta puede usarse para separar troncos o clavarse en el suelo para proporcionar estabilidad durante el trabajo. El gancho volteador se fabrica en longitudes de 79 cm y 125 cm (incluida la punta).
-
Sujeción con tope angular abatible
Conjunto adicional para la sujeción del tronco. Está compuesto por el sujeción y por el tope angular abatible.
-
Sujeción adicional
-
Sujeción excéntrica
Para un apriete fácil y rápido de la madera aserrada con cantos.
-
Engrasador
Sirve para el mantenimiento regular de la máquina según el plan de engrase. Engrasador de metal para cartuchos de 400 g. Equipado con una manguera flexible de presión.
-
Grasa plástica LV 2-3
Cartucho de 400 g para el engrasador.
CONSUMABLE PARTS
-
Hard-metal plate 20 x 0.9 mm
-
Hard-metal plate 9 x 6 mm
-
Running wheel wedge belt 17x1420 Li
Wheel wedge belt 17x1220 Li
Sierra de cinta para madera - montaje
-
Feed into the cut and back - hand-operated
Arm height adjustment - manual
Control panel - on a mobile bridge
Log handling - manualIn contrast to the standard version the sawmill is equipped with a professional Honda 8.7 kW (11 HP) petrol engine. Sufficient engine power allows trouble-free processing of logs of large diameters in all applications without the possibility of using an electric motor. Overall low weight allows easier transport of the machine. Due to higher weight and vibrations of petrol engine the construction of travelling bridge and sawmill arm is completely reinforced. The smallest machine in the offer. It is designed primarily for cutting smaller volumes of lumber. Ideal solution for family farms or small sawmilling companies. Very simple hand feed into the cut and back. The control panel is placed on a mobile bridge of the sawmill arm. Thanks to that the operator has closer access to the workpiece when cutting. Height is adjusted using a hand crank with adjustable scale.
The solidly mounted drive wheel is driven via a V-belt by a professional Honda petrol engine. Mechanical clutch lever enables an easy start of the engine and removal of the engine from the saw blade when the cut had finished.
The tensioning wheel system moves in a cast iron guide, which guarantees long service life and precision adjustment even with long-term use of the machine. The arm is fitted with aluminium running wheels with precise anti-vibration balancing. The circumference of the wheel has a recessed groove in which a replaceable rubber-textile V-belt is fitted, which forms the contact surface between the wheel and the saw blade. The stability of the machine is based on solid steel travel sections, which ensure optimum guidance of the sawmill bridge. The travel sections are fitted with tilting angle bars and log clamps/cam dogs.
The samill CTR 550 GX uses standard sawmill blades 27-35 x 0.9 mm as with the fully professional models.
The CTR model series represents the latest trends in log-cutting sawmill design, with special emphasis on maximum accuracy and long service life at minimum cost. The machines are designed in an original modular way, which allows easy replacement or adjustment of all main technical nodes and their individual parts. This significantly reduces maintenance costs in the long-term use of the machine and also reduces service times, thus reducing production downtime.
All pictures shown are for illustration purpose only. Actual product may vary due to product enhancement.
-
Max. log diameter 550 mm Max. opening betwen blade guides 500 mm Max. elevation of blade 465 mm Min. log height 20 mm Max. depth of cut 200 mm Max. log length (standard model) 3,6 m Length track section 2,25 m Min. log length 0,9 m Saw blade motor 8,7 kW Sawblade 3340 x 27÷35 x 0,9 mm Weight (standard model) 310 kg Weight (track section) 54 kg -
SPECIAL ACCESSORIES
-
Sección de extensión 2,25 m
Incluye de serie: 3x travesaños de apoyo, 1x tope angular, 1x sujeción de material Puntos de sujeción adicionales: 1x tope angular, 1x sujeción de material
-
Indicador de tensión de la cinta de sierra
Permite el tensado preciso de la cinta de sierra hasta el valor óptimo según el manómetro y, sobre todo, su control durante el funcionamiento de la máquina. Durante el corte se produce un cambio de temperatura en la cinta de sierra y, debido a la dilatación térmica, se alarga su longitud total. El resultado es una tensión insuficiente de la cinta, que es una de las principales causas de un corte desigual y ondulado.
En el indicador del manómetro verá inmediatamente la caída de presión y podrá proceder al tensado de la cinta de sierra. El tensado óptimo de la cinta es fundamental tanto para la calidad del corte como para la vida útil de la cinta y de toda la máquina.
-
Gancho volteador
Se utiliza para girar, rodar y manipular troncos. La punta puede usarse para separar troncos o clavarse en el suelo para proporcionar estabilidad durante el trabajo. El gancho volteador se fabrica en longitudes de 79 cm y 125 cm (incluida la punta).
-
Sujeción con tope angular abatible
Conjunto adicional para la sujeción del tronco. Está compuesto por el sujeción y por el tope angular abatible.
-
Sujeción adicional
-
Sujeción excéntrica
Para un apriete fácil y rápido de la madera aserrada con cantos.
-
Engrasador
Sirve para el mantenimiento regular de la máquina según el plan de engrase. Engrasador de metal para cartuchos de 400 g. Equipado con una manguera flexible de presión.
-
Grasa plástica LV 2-3
Cartucho de 400 g para el engrasador.
CONSUMABLE PARTS
-
Hard-metal plate 20 x 0.9 mm
-
Hard-metal plate 9 x 6 mm
-
Running wheel wedge belt 17x1420 Li
Wheel wedge belt 17x1220 Li
-
-
Sierra de cinta para madera - montaje