Bi-metal M 51

Saw blades for cutting of tool steel and stainless steel up to the hardness of 50 HRC. The tooth tips are made of HSS-M51 steel with cobalt and tungsten content.

Maxtech 531 / variable toothing

Characteristics:

tooth tips made of HSS M51 1.3207 ● especially strong shape of the tooth with a positive tooth face angle ● resistant to heat and deterioration tooth tips made of HSS M51 material increase the durability of the saw blade when cutting any possible hard and problematic materials.

Use:

  • steel up to tensile strength of approx. 1700 N/mm2
  • austenitic stainless steel
  • nickel-based alloys
  • titanium and special bronzes
  • full material of medium dimensions
  • thick-walled tubes.
     
PNumber of teeth per inch
[mm] 1,4/2 2/3 3/4 4/6 5/8
27 x 0,9 V-POS V-POS V-POS V-POS
34 x 1,1 V-POS V-POS V-POS
41 x 1,3 V-POS V-POS
54 x 1,6 V-POS V-POS
67 x 1,6 V-POS












V-POS = variable tooth with a positive angle


Maxtech 537 / variable toothing

Characteristics:

accurate, borazon ground tooth tips made of HSS M51 1.3207 ● tooth with a specific positive tooth face angle combined with borazon sharpened geometry and variable group setting diverts chips perfectly ● faceted teeth ensure excellent saw blade guidance at lower vibrations ● hardness of the tooth tips is approx. 69 HRc which increases the durability of the saw blade and the cutting performance.

Use:

  • steel up to tensile strength of approx. 1700 N/mm2
  • austenitic stainless steel
  • nickel-based alloys
  • full material of medium dimensions.
     
Number of teeth per inch
[mm] 0,75/1,25 1/1,5 1,4/2 2/3 3/4
34 x 1,1 V-POS V-POS
41 x 1,3 V-POS V-POS V-POS
54 x 1,6 V-POS V-POS V-POS V-POS
67 x 1,6 V-POS V-POS V-POS V-POS
80 x 1,6 V-POS V-POS












V-POS = variable tooth with a positive angle


Maxtech 544 / variable toothing

Characteristics:

tooth tips made of HSS M51 1.3207 ● special tooth form with a specific positive tooth face angle and standard setting ● perfect shape and surface quality of the teeth is achieved through pressure grinding during manufacturing

Use:

  • steel up to tensile strength of approx. 1700 N/mm2
  • austenitic stainless steel
  • nickel-based alloys
  • ttitanium and special bronzes
  • full material of the largest dimensions.
     
Počet zubů na palec
[mm] 0,75/1,25 1/1,5 1,4/2
41 x 1,3 V-POS
54 x 1,6 V-POS V-POS
67 x 1,6 V-POS V-POS
80 x 1,6 V-POS V-POS











V-POS = variable tooth with a positive angle


¿Qué son los cookies?

Son archivos de texto que se descargan en su computadora o dispositivo celular cuando empieza a usar una página web. De esta manera, las páginas recordarán las acciones realizadas en ellas y las preferencias (p.e. datos de ingreso, idioma, tamaño de las letras y otras preferencias de visualización) para que usted no tenga que volver a ingresar esta información y saltar de una página a otra.

Al seguir usando esta página expresa su consentimiento con la descarga de archivos cookies. Más información Menos información