CTR 750

Sawmill

Noncommittal Demand

Machine: CTR 750

Please enter your contact details. We will contact you as soon as possible.


Cancel

We confirm receipt of noncommittal demand

Demanded machine: CTR 750

Firstname:
Phone:
E-mail:
Your inquiry:
Destination country:

We will contact you as soon as possible using given contact details.

Back to website
4140 x 34-35 x 0,9-1,0 mm
∅ 750
640
530 x 530

Feed into the cut and back - hand-operated
Arm height adjustment - manual

Control panel - on a mobile bridge
Log handling - manual

The bigger and stronger version of the popular CTR 550 allows for processing of logs up to 75 cm in diameter. Ideal solution for family farms or small sawmilling companies.

Simple hand feed into the cut and back. Height is adjusted using a hand crank with adjustable scale.

The solidly mounted drive wheel is driven via a V-belt by a professional electric motor, specially balanced against vibration. The basic version of the machine is equipped with a powerful 5.5 kW motor. For even higher performance, for example when cutting oversized logs or even when cutting very hard materials, a 7.5 kW motor can be used. Circuit breaker 16 A (25 A for the 7.5 kW motor). 

The tensioning wheel system moves in a cast iron guide, which guarantees long service life and precision adjustment even with long-term use of the machine. The arm is fitted with aluminium running wheels with precise anti-vibration balancing. The circumference of the wheel has a recessed groove in which a replaceable rubber-textile V-belt is fitted, which forms the contact surface between the wheel and the saw blade.

The stability of the machine is based on very solid steel travel sections, which ensure optimum guidance of the sawmill arm bridge. The travel sections are fitted with tilting angle bars and log clamps/cam dogs.

The sawmill CTR 750 uses standard saw blades 34-35 x 0,9-1,0 mm as with the fully professional models.

The CTR model series represents the latest trends in sawmill design, with special emphasis on maximum accuracy and long service life at minimum cost. The machines are designed in an original modular way, which allows easy replacement or adjustment of all main technical nodes and their individual parts. This significantly reduces maintenance costs in the long-term use of the machine and also reduces service times, thus reducing production downtime.

All pictures shown are for illustration purpose only. Actual product may vary due to product enhancement.

Max. log diameter 750 mm
Max. opening betwen blade guides 640 mm
Max. elevation of blade 635 mm
Min. log height   25 mm
Max. depth of cut 255 mm
Max. log length (standard model) 3,45 m
Length track section 2,25 m
Min. log length 0,75 m
Saw blade motor 5,5 kW
Sawblade 4140 x 34-35 x 0,9-1,0 mm
Weight (standard model) 400 kg
Weight (track section) 68 kg

Nomimal current of circuit breaker is minimally 16 Ampere

SPECIAL ACCESSORIES

  • Extending section 2,25 m

    Include: 3x Cross beams, 1x Tilting angle bar, 1x Clamp
    Variable points: 1x Tilting angle bar, 1x Clamp

  • Main motor 7.5 kW

    For even higher performance, for example, when cutting oversized logs or even when cutting very hard materials, especially with Stellite-tipped blades 7.5 kW motor can be recommended.

  • Saw blade tension indicator

    Ensures accurate tensioning of the saw blade to a required value according to the pressure gauge and its control during the use of the machine. Optimum tensioning of the saw blade is essential for its service life and cutting accuracy.

  • START/STOP cooling system

    Integrated in the cooling system is an electromagnetic through-flow valve, which automatically opens when the saw blade is started and closes when the saw blade is stopped. It substantially lowers the coolant consumption and saves time needed for replenishment of coolant liquid.

  • Cant hook

    Serves as help with manipulation with logs on machine frame.

  • Clamp with tilting angle bar

    Additional clamping kit. It consists of  the clamp and a tilting angle bar.

  • Additional clamp

  • Cam dog

    For fast and easy squared lumber clamping.

  • Grease Gun

    For regular maintenance of the machine according to the lubrication plan. Metal grease gun for 400g tubes. Equipped with a flexible pressure hose.

  • Synthetic Grease LV 2-3

    400g tube for the grease gun.

CONSUMABLE PARTS

  • Running wheel V-belt SPB 1850
    Driven Wheel V-belt B 17x1560 Lw

  • Blade Roller Kit  VK 750

    Hardened roller, bearings, and shaft designed for a sawmill blade 35 mm.

Machine assembly

  • Feed into the cut and back - hand-operated
    Arm height adjustment - manual

    Control panel - on a mobile bridge
    Log handling - manual

    The bigger and stronger version of the popular CTR 550 allows for processing of logs up to 75 cm in diameter. Ideal solution for family farms or small sawmilling companies.

    Simple hand feed into the cut and back. Height is adjusted using a hand crank with adjustable scale.

    The solidly mounted drive wheel is driven via a V-belt by a professional electric motor, specially balanced against vibration. The basic version of the machine is equipped with a powerful 5.5 kW motor. For even higher performance, for example when cutting oversized logs or even when cutting very hard materials, a 7.5 kW motor can be used. Circuit breaker 16 A (25 A for the 7.5 kW motor). 

    The tensioning wheel system moves in a cast iron guide, which guarantees long service life and precision adjustment even with long-term use of the machine. The arm is fitted with aluminium running wheels with precise anti-vibration balancing. The circumference of the wheel has a recessed groove in which a replaceable rubber-textile V-belt is fitted, which forms the contact surface between the wheel and the saw blade.

    The stability of the machine is based on very solid steel travel sections, which ensure optimum guidance of the sawmill arm bridge. The travel sections are fitted with tilting angle bars and log clamps/cam dogs.

    The sawmill CTR 750 uses standard saw blades 34-35 x 0,9-1,0 mm as with the fully professional models.

    The CTR model series represents the latest trends in sawmill design, with special emphasis on maximum accuracy and long service life at minimum cost. The machines are designed in an original modular way, which allows easy replacement or adjustment of all main technical nodes and their individual parts. This significantly reduces maintenance costs in the long-term use of the machine and also reduces service times, thus reducing production downtime.

    All pictures shown are for illustration purpose only. Actual product may vary due to product enhancement.

  • Max. log diameter 750 mm
    Max. opening betwen blade guides 640 mm
    Max. elevation of blade 635 mm
    Min. log height   25 mm
    Max. depth of cut 255 mm
    Max. log length (standard model) 3,45 m
    Length track section 2,25 m
    Min. log length 0,75 m
    Saw blade motor 5,5 kW
    Sawblade 4140 x 34-35 x 0,9-1,0 mm
    Weight (standard model) 400 kg
    Weight (track section) 68 kg

    Nomimal current of circuit breaker is minimally 16 Ampere

  • SPECIAL ACCESSORIES

    • Extending section 2,25 m

      Include: 3x Cross beams, 1x Tilting angle bar, 1x Clamp
      Variable points: 1x Tilting angle bar, 1x Clamp

    • Main motor 7.5 kW

      For even higher performance, for example, when cutting oversized logs or even when cutting very hard materials, especially with Stellite-tipped blades 7.5 kW motor can be recommended.

    • Saw blade tension indicator

      Ensures accurate tensioning of the saw blade to a required value according to the pressure gauge and its control during the use of the machine. Optimum tensioning of the saw blade is essential for its service life and cutting accuracy.

    • START/STOP cooling system

      Integrated in the cooling system is an electromagnetic through-flow valve, which automatically opens when the saw blade is started and closes when the saw blade is stopped. It substantially lowers the coolant consumption and saves time needed for replenishment of coolant liquid.

    • Cant hook

      Serves as help with manipulation with logs on machine frame.

    • Clamp with tilting angle bar

      Additional clamping kit. It consists of  the clamp and a tilting angle bar.

    • Additional clamp

    • Cam dog

      For fast and easy squared lumber clamping.

    • Grease Gun

      For regular maintenance of the machine according to the lubrication plan. Metal grease gun for 400g tubes. Equipped with a flexible pressure hose.

    • Synthetic Grease LV 2-3

      400g tube for the grease gun.

    CONSUMABLE PARTS

    • Running wheel V-belt SPB 1850
      Driven Wheel V-belt B 17x1560 Lw

    • Blade Roller Kit  VK 750

      Hardened roller, bearings, and shaft designed for a sawmill blade 35 mm.

  • Machine assembly