ARG 105 mobil
We confirm receipt of noncommittal demand
Demanded machine: ARG 105 mobil
Firstname:
Phone:
E-mail:
Your inquiry:
Destination country:
We will contact you as soon as possible using given contact details.
Back to website
Small portable bandsaw designed for construction sites, installations and workshop production. In order to minimize the total weight the arm, base plate and table are made of cast aluminium. To achieve the maximum service life the vice and wheels of the saw blade are made of grey cast iron. Saw blade feed into cut, arm uplift and material clamping are carried out manually.
- Modern concept of the bandsaw arm allows for large cutting ranges in upright and angular cuts.
- Continuous adjustment of the cutting angle within the range 90°–60° when the workpiece is clamped tight.
- Simple locking and adjusting of the desired cutting angle on the angle scale.
- Maximum cutting accuracy and saw blade service life in this category of bandsaws.
- High-precision three-side hardmetal bandsaw guidance.
- Manufactured bearing of running wheels and tensioning wheel system are the same as in big professional machines.
- Professional, noiseless and maintenance-free band drive is provided by an industrial electric motor with worm gearbox.
- The machine is equipped with a 200mm workpiece stop.
All pictures shown are for illustration purpose only. Actual product may vary due to product enhancement.
| 90° | +45° | +60° | |
 |
105 | 70 | 40 |
 |
105 | 65 | 40 |
 |
105 x 110 | 65 x 85 | 40 x 45 |
| Main motor | 230 V, 50 Hz, 0,55 kW |
| Saw blade speed | 55 m/min. |
| Machine dimensions (min.) | 300 x 750 x 450 mm |
| Machine dimensions (max.) | 650 x 850 x 710 mm |
| Machine weight | 29 kg |
-
Workpiece stop - Standard equipment
Simple stop for setting the required length of the material to be cut.
-
Small portable bandsaw designed for construction sites, installations and workshop production. In order to minimize the total weight the arm, base plate and table are made of cast aluminium. To achieve the maximum service life the vice and wheels of the saw blade are made of grey cast iron. Saw blade feed into cut, arm uplift and material clamping are carried out manually.
- Modern concept of the bandsaw arm allows for large cutting ranges in upright and angular cuts.
- Continuous adjustment of the cutting angle within the range 90°–60° when the workpiece is clamped tight.
- Simple locking and adjusting of the desired cutting angle on the angle scale.
- Maximum cutting accuracy and saw blade service life in this category of bandsaws.
- High-precision three-side hardmetal bandsaw guidance.
- Manufactured bearing of running wheels and tensioning wheel system are the same as in big professional machines.
- Professional, noiseless and maintenance-free band drive is provided by an industrial electric motor with worm gearbox.
- The machine is equipped with a 200mm workpiece stop.
All pictures shown are for illustration purpose only. Actual product may vary due to product enhancement.
-
90° +45° +60° 105 70 40 105 65 40 105 x 110 65 x 85 40 x 45 Main motor 230 V, 50 Hz, 0,55 kW Saw blade speed 55 m/min. Machine dimensions (min.) 300 x 750 x 450 mm Machine dimensions (max.) 650 x 850 x 710 mm Machine weight 29 kg -
-
Workpiece stop - Standard equipment
Simple stop for setting the required length of the material to be cut.
-
-